JP1: usb cable: 4 wires from the A type USB connector: 1) RED; 2) WHITE; 3) GREEN; 4) BLACK
JP2: RC transmitter cable: 2 wires from buddy box: 1) PPM SIGNAL; 2) GND
JP3: ICSP connector: SIL 5 pin male connector: 1) VPP; 2) VDD; 3) VSS; 4) RB7; 5) RB6
RES1: 6 MHz ceramic resonator (3 terminals with built in parallel capacitors)
C1: 200n capacitor (0805)
C2: 100n capacitor (0805)
R1: 22k resistor (0805)
R2, R4: 10k resistors (0805)
R3: 1.5k resistor (0805)
R5: 200 Ohm resistor, but only if D1 is blue !! (0805)
IC1: PIC16C765/JW microcontroller (40-Lead Windowed CERDIP)
D1: blue led; if you use other color put R5=1k !! (0805)
T1: BC846 transistor (SOT23)
